| Message: | Hydraulic & Lube Oil FilterHydraulic filters are used in demanding applications of filtration of oil at any operating conditions. Irrespective of operating conditions like high pressure, low pressure, highly viscous oil, or highly contaminated oil, we have best adequate solution for these applications. We have filters which can remove moisture contents from oil.Hydraulic filters are subcategorized asSuction strainerReturn line filterHigh pressure filterMedium pressure filterLow pressure filterOffline & portable mobile filter unitReplacement filter elementsMoisture removal filterSenming manufacture full range of wire mesh suction strainers for export to Germany, Singapore, America, etc. Extra caution should be taken to ensure that the suction elements are always mounted below the minimum oil level of the reservoir. Standard models have nominal filtration ratings of 74 or 125 microns. The suction strainer elements can also be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold starting. The bypass valve opens at 3 psi. For best results, suction strainer elements should be sized for clean element pressure drops off no higher than 0.5-.07 psi.Filter mediaBorosilicate glass fiber mediaGlass fiber with laminationResin impregnated paper mediaSS wire meshSynthetic fiber mediaSintered metal Fiber MediaApplication:HydraulicCeramicPower plantRefineriesHeavy earth moving url:http://www.filterscreentech.com |
my account