| Message: | Main uses:For glass, aluminum alloy, plastic, plastic steel windows and doors, ceramic, non assembly oily Wood ,fishing equipment etc.;Powder coated aluminum must be solvent completely remove wax coating.Construction Guide:Must use solvents such as toluene or acetone, keep the interface clean and dry. As to the use of a primer to enhance its adhesion, when the primer is dry before construction. Construction application of sealant joints completely filled ensure a double faced adhesive. Taped the protection of sites in need, but make sure the tape not to touch the surface of construction will be. Before the gum is solidified, trimming immediately, in order to achieve the beautiful appearance.Restrictions:When the surface of the material at the temperature above 40 DEG C ,can't be constructed using the sealant; cannot be used as structural adhesive; not in the wet surface construction; cannot be used for oil or oil leakage surface; cannot be used directly in the new cement concrete surface.Storage and Usable life:12 months from manufacture date When store in cool and dry environment, the temperature below 27 DEG C,keep away from heat source and direct sunlight during storage.JWH-101 Acetic Silicone SealantPerformanceStandardMeasured ValueTesting MethodTest at 50±5% RH and temperature 23±20C:Density (g/cm3)±0.11GB/T 13477Tack-Free Time (min)≤1805GB/T 13477Extrusion (ml/min)≥80750GB/T 13477Tensile Modulus (Mpa)230C0.450.1-0.46GB/T 13477200Cor 0.70.1-0.7Slumpability (mm) verticalnot change shapenot change shapeGB/T 13477Slumpability (mm) horizontal≤30GB/T 13477Curing Speed (mm/d)23/As Cured -After 21 days at 50±5% RH and temperature 23±20C:Hardness (Shore A)20~6026GB/T 531Tensile Strength under Standard Conditions (Mpa)/0.29GB/T 13477Elongation of Rupture (%)/478.6GB/T 13477Movement Capability (%)12.512.2GB/T 13477Storage12 MonthsPictureNO.JWHGP-A-1011.2JWHGP-A-1023.4JWHGP-A-1035.6JWHGP-A-1047.8JWHGP-A-1059.10 url:http://www.silicone-frp.com |
my account