| Message: | Kunxing Glass Mirror Products Co,.Ltd is one of the leading curved tempered glass shower door manufacturers in China, welcome to buy curved tempered glass shower door from our factory.Curved glass manufacture is a time-consuming, highly specialized job.1. Cut the sheet of glass to size and then clean and polish it, using a UV lamp to check for dust or impurities (any rogue particles would cause the glass to crack or shatter).2. A steel mould is shaped to the curve radius and dimensions of the desired piece.3. To stop the pane sticking to the mould, the glass is painted with a mixture of detergent and calcium carbonate.4. Glass is placed on the mould and loaded into the kiln. Cranking up the heat to 700°C, it will be hot enough to loosen the bonds between the silica molecules so that the glass starts to soften and bend to the profile of the mould. Once in shape, the glass is gradually cooled over a period of about two hours.Glass solid tempered glass door is made from annealed glass via a thermal tempering process. Tempered glass is often referred to as "safety glass." Solid tempered glass is more resistant to breakage than normal float glass. Solid tempered glass is four to five times stronger than annealed glass and does not break into sharp shards when it fails, which are less likely to cause serious injury.ADVANTAGES:1. The anti-impacting performance and anti-bending performance are 3-5 times higher than ordinary glass.2. It breaks into granules in case of strongly knocked, so no hurt would be caused. 3. deflection angle of tempered glass is 3-4 times larger than that of float glass of the same thickness. When there is load on tempered glass, its maximum tensile stress does not located on the glass surface as float glass, but on the central point of glass sheet. url:http://www.dgkxglass.com |
my account