| Message: | Description:Traveling block and hook combination is used to safely and efficiently raise or lower tools and equipment in the well,raise or run strings of drill pipe and casing, or hold the power swivel on a work over rig. Our traveling block and hook are according to API Spec 8C.A traveling block is the freely moving section of a block and tackle that contains a set of pulleys or sheaves through whichthe drill line (wire rope) is threaded or reeved and is opposite (and under) the crown block (the stationary section).The combination of the traveling block, crown block and wire rope drill line gives the ability to lift weights in the hundreds of thousands of pounds.On larger drilling rigs, when raising and lowering the derrick, line tensions over a million pounds are not unusual.The hook is manly composed of barrel, hook body, hook rod and spring etc. In the barrel there are inner and outer springs which can make the pin of standpipe spring up backwards.On the top of the barrel there is a safety positioning device. When lifting an empty elevator, the positioning device can stop the rotation of the hook body; when lifting a elevator with drill string, the positioning device no longer can stop the rotation of the hook body; the hook body can rotate freely.Technical Parameter:ModelYG90YG135YG170YG180YG225YG450Max hook load kN90013501700180022504500Pulley O.Dmm76291591591511201524in303636364460Pulley Qty445556Wire rope Diamm 26 2629293238in111 1/81 1/81 1/41 1/2Main hook opening sizemm155165180180180220in6 1/166 1/27778 5/8Main hook diamm116140150150180180in4 1/25 1/26677Assistant hook diamm809090900120in3 1/83 1/23 1/23 1/20 4 3/4Sizein 114×32×21 126×38×24 130×38×28 134×38×29 142×38×31 192×63×35Weightkg2850359045854594620012530Ib6280791010108101201365727620 url:http://www.fypedrilling.com |
my account