| Message: | As one of the leading weld end triple eccentric butterfly valve manufacturers and suppliers in China and equipped with a productive factory, Shanghai Hugo Valve Co.,Ltd is always at your service.Weld end triple eccentric butterfly valve Description 1, Weld end triple eccentric butterfly valve adopted triple eccentric structure, the seat and sealing surface used stainless steel or alloy steel with different hardness, which is be of abrasion resistance, with long longevity.2, The position device along the stem eliminates the leaking problem due to the damage or wearing at the upper and bottom seal faces resulted from the up and down axial movement of the disc, which makes it possible to install the actuator in any direction.3, bi-direction seal4, because of the welded end structure, there is no leakage for the connection places between valve and pipe permanently.5, as the welded end, the welded end triple eccentric butterfly valve is more easy to be installed on the pipe, reduced installation space. 6, Weld end triple eccentric butterfly valve is suitable for the working condition with high pressure and high temperature.Valve materials of constructionBody Materials: WCB + S.S.or alloy , CF8/CF8M+alloy Seat Materials: S.S., alloyDisc Materials: WCB/ duplex S.S./CF8/CF8M/CF3M+STELLITE Stem Materials: SS416/420, 17-4PH, SS304, SS316,S.S.316L, duplex S.S. Applicable standard Size Range: 4~80"(DN100~DN2000）Pressure: PN10, PN16, PN40,PN64, Class 150-class 600Standard : ANSI, DIN, JISEnd Connection: butt weld Operate: Manual, worm gear, pneumatic actuated and electric motorized. url:http://www.hugo-valves.com |
my account