| Message: | Quick Detail:1.Application for solar light, back up battery2.With PCB and Terminal Connector3.Long cycle life, no memory, environment friendly4.The connector is Molex-43640200,and the wire is 1371# with UL5.The connector are 2 pin6.The length of wire is 150mmSpecification:No.ItemsSpecifications1Charge cut-off voltage3.65V2Nominal voltage3.2V3Minimal capacity3300mAh @ 0.2C Discharge4Nominal capacity3350mAh @ 0.2C Discharge5Charge current1C6Standard charging method1C CC (constant current) charge to 3.65V, then CV (constant voltage 3.65V) charge till charge current decline to £ 0.05C7Charging timeStandard charge: 2.0 hours Ref8Max.charge current2C9Max.continue discharge current10A (Cell skin temperature cannot exceed 80°C)10Discharge cut-off voltage2.0V11Operating temperatureCharging:-10°C ~ 45°C Discharging: -20°C ~ 60°C (Cell skin temperature cannot exceed 80°C)12Storage temperature/humidityTemperature -10°C ~ +35°C Humidity 65%±20%RH (Recommended to store 23 ± 5°C for long term storage)13Cell Weight80.0g±1.0g14Cell DimensionLength: 65.0±0.3 mm Width:26.2±0.2 mm url:http://www.sunlandpower.com |
my account