my account  log out
 
  Invalid Buy Request Report             Home       

Invalid Buy Request Report

Subject: Professional J-1 Crystal High Efficiency Fast Reaction Pickling Passivation Gel Paste For Welding Line Welding Seam/stainless Steel Workpiece Passivation Solutions Procedure Passivating Stainless Steel Welds
Message: Product FunctionIt shows ivory-white grease mode, it's mainly used for surface stainless steel, welding line and heat press end socket; It's suitable for industries as chemical, food, dyeing & pharmacy machineries, pressure vessel making and drying equipment, chemical equipment & its installation, etc. It will have equable & fine silver feature on the surface of the stainless steel, and improves the surface fineness, strengthens anti-corrosive ability & prolongs service life.Instructions1. For cleaning of welding line oxide, first clean welding residue welding line and oily soil, then paint grease on the pretreated surface with the coating thickness is 1~2 mm and resort about 1~2 hours is needed, at last clean residues on the cleaning surface with cotton waste or rug (water washing is better) until bright and clean.2. For cleanup the thick oxide on heat press end socket and surface of heat treatment accessory, first clean oily soil on the pretreated surface, then paint grease on the surface equably with the coating thickness is about 2 mm and resort about 5~ 10 hours is needed, at last brush with the card completely or clean residues with cotton waste or rug (water washing is better) until bright and clean.3. Excellent ventilation on the site during operation, the operator should wear rubber gloves & shoes and respirator. If closed environment during operation is existed, it must use ventilation system with two operators work together.4. The grease should be charged & collected by person specially, covered for the vessel and kept vertical state.5. Once corrode the operator's skin, water washing immediately (or washing with 5% sodium bicarbonate liquid).WarningIt must collect exhausted cotton waste and rug together, then into a plastic barrel, and neutralizing treatment mixed with calcium carbide paste.Consumption EstimateFor cleaning of general stainless steel welding line and argon arc welding line, it needs about 0.5 kg every one hundred meters; For cleaning of......url:http://www.hdpicklingpassivation.com
Reason:
Copyright © toextrade Inc. All rights reserved. Contact us