| Message: | Aluminum honeycomb working platformHoneycomb structures have the geometry of a honeycomb to allow the minimization of the amount of used material to reach minimal weight and minimal material cost. The geometry of honeycomb structures can vary widely but the common feature of all such structures is an array of hollow cells formed between thin vertical walls. A honeycomb shaped structure provides a material with minimal density and relative high out-of-plane compression properties and out-of-plane shear properties.High performance aluminum honeycomb exactly as supplied to the world's top composites engineering, Downdraft honeycomb cutting table holds materials without fixtures and removes smoke and debris which may impact quality.For all laser machine cutting acrylic, wood,..., clean jobWhen your artwork is very dense or we are cutting a less rigid material such as paper or fabric we need to use the honeycomb bed to keep it evenly flat as the pieces are cut. The aluminum honeycomb cells support the material whilst allowing heat and debris to dissipate from beneath.Top surface marks from fumes and debrisFumes and debris are emitted when cutting / engraving. These fumes are extracted from the rear or base of the machines. The fumes are dragged over the material surface causing marks. Marks also appear from hot debris which glazes or scorches the exhaust-facing edges of the cut line.Honeycomb bed url:http://www.honeycombchina.com |
my account