| Message: | Roll to Roll Battery Electrode Continuous/ Intermittent Coating Machine (Max. 280mm Width)SPECIFICATIONSThe lithium battery coating machine TOB-ZST- 300-12M model coating machine is a transfer continuous and intermittent coating machine mainly used for Slurry drying process of lithium battery electrode coating. The battery coating machine adopts continuous and Intermittent coating mode.the coating thickness is easy to adjust,more accuracy,easy to operate.it can do both continuous coating and interval coating.ModelTOB-ZST- 300-12MPower3PH 380V,50HZSuitable systemLiFePO, lithium cobalt oxide,Lithium manganese oxide system and coating process of battery anode and cathodeOperating material thicknessAl foil: 10~30um Cu foil: 7~30umThe design of the roll surface width300mmGuaranteed coating width50~280mmMechanical running speed of equipment7m/minCoating speed1-7m/min（Depending on the drying condition)Suitable for slurry viscosity2000~16000 CpsSingle coating thickness range50-150μmMinimum interval length5mmMulti section minimum coating length20mmSolvent propertiesOiliness solvent NMP(s.g=1.033,b.p=204℃)Water solvent H2O/NMP(s.g=1.000,b.p=100℃)Suitable solid contentAnode S.C. 60%±20%Cathode S.C. 60%±20%(PVDF system)S.C. 50%±5%(SBR system)Specific gravityAnode 1.5—2.59/cm2Cathode 1~1.89/cm2Coating methodDouble sides 3 sections, unequal intermittent transfer coating / second sides automatic tracking / continuous transfer coatingBase material running directionForward coating ,The base material empty foil movement Positive, reverse.Control pressure0 ~ 50NRectify deviationEPC control,stroke 80mmOven length12mMaterial qualitySUS304 stainless steel,Inner tank 1.0mm,outside tank 1.2mmWarrantyOne year limited warranty with lifetime support url:http://www.amoytob.com |
my account