| Message: | Fire Alarm Cable FPLR FPLP, Multiple cores, PVC insulated solid bare copper conductors, twisted with an overall PVC jacket with ripcord. Shielded version has an PET film + aluminum tape + drain wire. FPLR / FPLP graded jacket
General Specifications:
Model
Conductor
Insulation
Jacket
Material
Diameter
Material
Diameter
Material
Diameter
2Cores
Solid BC
0.80mm
FR-PVC/LSOH
1.5mm
FPLR-PVC/FPLP-PVC/LSZH
4.6mm
Conductors are either cabled or twisted pairs
Typical Types: 18/2C, 18/4C, 16/2C, 16/4C, 14/2C, 14/4C, 12/2C, 12/4C.
Shield is used to protect against interference created from other cables or outside electronic/ electrical or mechanical devices.
Shield is normally 100% Aluminum foil wrap
More types available upon request.
Parameters provided above are subject to change based on different manufacturers variances.
Features:
Two bare copper insulated conductors with an overall shield and a drain. The assembly has an overall jacket. Rated for use from -20°C to +75°C. Suggested voltage rating: 300 volts.
Applications:
Wiring of fire alarms, smoke detectors, voice communications, burglar alarms, fipleire protective circuits.
This fire alarm cable is composed of multiple cores of copper conductor and the conductor size can be 22AWG to 12AWG.
All fire alarm cables are manufactured with solid copper conductors so they all carry current in the same way. The things you need to worry about have to do with the insulation and whether it has a high enough temperature rating to not melt in the insulation or if it needs outdoor weather protection. These things can puncture the insulation and short the connection by hitting the copper wire which could cost a lot of money to fix.
FPLR is a fire alarm cable with Riser graded PVC jacket and solid copper conductors. This would be the cheaper version because it can't be used in as many applications as th......url:http://www.chinahuiercable.com |
my account