| Message: | Description of Concrete pouring machine
It is used to stir the production raw materials, make them evenly mixed, fully react, and inject the mixed slurry into the mold frame in time.
Structure of characteristic of Concrete pouring machine:
The aerated concrete pouring machine adopts propeller type agitation to form a strong eddy current in the tank, destroying the coating of the quicklime particles to achieve a fully uniform mixing. At the same time, the pouring arm can be adjusted to height with the pouring process to prevent splashing. The machine is divided into fixed and mobile mixing slurry, and quantitatively poured on the mold.
The operation method of Concrete pouring machine:
1. Check the appearance of the machine, whether the machine is damaged due to long-distance transportation, especially the electrical appliances in the electric box, and whether the wires are disconnected.
2. Turn on the power and the device housing should be grounded. Start the motor and see if it works.
3. Put it in the hopper, insert the 1m or 0.5m twisting cage according to the construction height and angle, and the angle of the upper and lower blade joints should be aligned according to the spiral angle. Then install the ash port. Finally lock the buckle.
4.4 Ridge winch. (The height of the twisted cage Li Qi is higher than the height of the pillar or lintel to be poured) Push to the construction point and extend the ash hose into the ash hole.
5. When starting to use, the pipe should be wetted with ash, and the ash in the pipe should be exported. Then clean the hopper, the gray pipe, etc. url:http://www.ztmineequipment.com |
my account