| Message: | Hand-Pushing Scabbler|Multi-Headed|Pneumatic
Advantage: 1 models small, flexible operation, 2 life of more than 3000m2 3 per hour hammering area by different concrete strength up to 30-100 square meters.
Operating instructions of multi-headed scabbler:
multi-headed scabblers are rugged dependable Piston Scabblers designed to give you years Follow the instructions mentioned here to enhance life and performance of your scabblers.
DAILY BEFORE OPERATING: Disconnect and pour in 1 to 2 ounces of recommended oil into the Pneumatic Piston Scabbler reconnect hose after blowing out any accumulated dirt in the hose line before connection Check all parts of the Piston Scabbler are fully screwed together and secure.
LUBRICATION REQUIREMENTS: Always install a line lubricator on the air line as close to the Pneumatic Piston Scabbler Filter Regulator Lubricator unit (FRL) is strongly recommended. Keep the lubricator bowl topped up with recommended grade of oil and check that the oil is reaching the Pneumatic Piston Scabbler Pneumatic Piston Scabbler without lubrication is likely to cause damage to the component premature replacement.
AIR SUPPLY: The Scabblers work best at 6.2 bar (90 psi) air pressure. The air should be clean, dry and lubricated. Install a FRL unit as close as operation will permit. HOSES Daily before operation check the hoses for damage or leaks. Use genuine Teryair spares and if possible mention the serial number of the Pneumatic when ordering spares. url:http://www.ztmineequipment.com |
my account