| Message: | Distant learning
1. Press the first button and the second button of the remote control that have been learned at the same time, the controller indicator light is on, and the buzzer beeps once to enter the learning process. Then follow the on-board learning steps to learn.
Attention: The controller supports standard EV1527 (the rate 400, frequency 433.92MHz, four button values are 1, 2, 4, 8) and Juhui HSC301 remote control (rate 400, frequency 433.92MHz, four button values 2, 4 , 8, 1), at most 100 groups, the user can choose which kind to use for learning, and this receives can accept uniformly.
Route Learning
1. Turn the dip switch 4 to ON, and press the first and third button of the remote control that you have learned. The buzzer will beep once to start the route learning.
2. You can press the remote control or external manual button to make the motor run for some time until it stops ,and the controller will record the route learning time.
3. Press the first and third buttons on the remote control that you have learned again, and the buzzer will beep twice to end the route learning.
4. During the route learning, the motor stops for 8 seconds, the buzzer beeps twice, and it automatically exits the route learning. The learning failed.
5. Dip switch 4 switches to OFF during the route learning, the buzzer beeps twice, and the route learning is automatically exited. The learning failed.
Automatic Closing Time Learning
1. Turn the dip switch 5 to ON, and meanwhile press the second and third keys of the remote control that have been learned.The buzzer will beep once, and the automatic closing time learning will start.
2. After waiting for the time you need , press the second and third keys of the remote control that you learned again, and the buzzer will beep twice to end the automatic closing time learning.
3. Turn the Dip switch 5 to OFF, during automatic closing time learning, the buzzer will beep twice, and automatic closing time learning......url:http://www.juhuitech.net |
my account