| Message: | Main technical specifications and parameters
1. Power supply: AC 220V (-5%~+10%), 50 Hz;
2. Measurement range:
(1) For asphalt, the softening point of which is under 80°C,
you can take distilled water as heating medium : +5°C~+80°C
(2) For asphalt, the softening point of which is over 80°C,
you should take glycerin as heating medium. +32°C~+160°C
3. Temperature resolution: 0.01°C
4. Stirrer: the stirring speed can be adjusted continuously.
5. Heating rate: it will be adjusted to 5.0±0.5°C/ min automatically
after three minutes
6. Test result: It uses the LCD to show it and the printer to print it.
7. Heating power: 600 W
8. Computer communication interface: RS232C communication interface
9. Cubage of beaker: 1000 ml
10. Ambient temperature: The temperature should be less than 35°C
and keep stable. There should not have any air draft.
11. Relative humidity: no more than 85%
12. Total power consumption: no more than 700 W |
my account
