| Message: | CM225 Solar-Sensor Mounting Stand
To make accurate measurements, solar sensors must be mounted where they are not shaded, and level. To achieve this, typically a leveling base and a mounting stand are required.
The CM225 mounting stand is used to attach one solar radiation sensor to a horizontal crossarm or vertical mast (1.0" to 2.1" OD). Compatible sensors include the LI200X, CMP3, LP02, and CS300 pyranometers, as well as the LI190SB Quantum Sensor. An LI2003S, 18356 Leveling Base, or similar base and leveling fixture may be required depending on the sensor selected.
Features
Solar sensor mounting stand
Leveling base or leveling fixture required
Can be mounted vertically or horizontally
Specifications
Consists of a rectangular plate, mounting bracket, u-bolts, lock washers, nuts
LI2003S Pyranometer Base and Leveling Fixture
The LI2003S Pyranometer Base/Leveling Fixture is required to attach a LI200X pyranometer or LI190SB quantum sensor to our CM225 solar sensor mounting stand, 015ARM mounting arm or 025STAND crossarm stand. The LI2003S levels the sensor in the horizontal plane, helping to ensure accurate solar radiation measurements. The LI2003S uses a bubble level and three adjustable leveling screws to level the sensor.
http://www.channelinstruments.com/v_1/811.aspx |
my account
