| Message: | 1.Mardo MOTORBLINDSlocated in Room 319-321, Block A, Science and Technology Park, Zhejiang University, West Lake,City area,Hangzhou City,Zhejiang Province,China,with elegant environment and convenience, market information delivered smoothly.Mardo is Mardo which is a specialized inHome merchandise,Home textile,Riyongbaihuo.
2.Mardo3.The work flow of motorised vertical blinds: 1) aluminum alloy louver is finished in the construction wall project wet operation, and wall surface harden to carry on installation again. 2) preparation work: before construction, carry scaffold to the corresponding floor to build, contact with the construction unit, Prepare the power supply. 3) when installing, carry the shutter frame to the opening of the installation hole according to the identification number, release the installation position line of the shutter frame and install it again. The electric welding machine is connected well, the hot-dip galvanized pipe is welded on the steel side of the hole by electric welding machine, and the hundred blades are fixed on the hot tinned pipe in the order from top to bottom, and the 100-leaf frame is fixed with self-drilling self-tapping wire and hole opening. 4) A After installation, the gap between the motorised vertical blinds and the wall is filled with polyurethane foam agent. After the foam agent is solidified, the excess foam is cut off with a wallpaper knife. When cutting, the foam needs to be eaten in the frame 3-5mm, and the dirt from the inside and outside of the window frame is cleaned with a brush. Inside and outside window frame glue seams embedded. 5) during the installation process to clean up pollutants, do a good job of finished product protection. When the motorised vertical blinds is placed, the floor should be laid to protect the floor from damage.is focused on motorised vertical blinds Quote, The best of the country motorised vertical blinds, Industry first motorised windows, motorised vertical blinds Professional? an |
my account
