| Message: | Q: I've found a simple solution intended for tight lug nuts that Trying to find using for over 30 years. Whenever I actually get a car, I remove the haul nuts and wheel, brush the particular threads with a wire brush plus lightly coat the threads along with anti-seize compound. I also put several compound on the wheel rim exactly where low torque wrench makes contact with the hub or even drum. It just takes a little bit of anti-seize substance.
A: You generate great suggestions, with which I concur — mostly. You mention that will proper torque is important. I concur and that means using a torque wrench tool. But experts tell us not to make use of any lubricant, including anti-seize substance, on wheel studs or nut products. The tech folks at Car tire Rack state: "Torque specifications are usually for dry threads only. The particular fastener threads should be free of essential oil, dirt, grit, corrosion, etc . low torque wrench is necessary NOT to lubricate hardware threads or even seats. The friction at which rpm is measured against should originate from the hardware seats. Lubricating equipment threads and seats alters the particular friction generated which will result in incorrect torque readings and/or over-torqueing from the hardware. "
Q: I replaced a windscreen on my 2008 Honda CRV and found that the interior blowing wind noise increased dramatically. Is this exactly what usually happens when you have a windshield changed? Now my 2016 Avalon requires a windshield and I'm hesitant to get it replaced.
Hydraulic wrenches range from the most common household types to specialty types.Check out the website that specializes in wrenches at https://www.atwwren.com for details.
Or contact us
Company Name: Hang Zhou WREN Hydraulic Equipment Manufacturing Co., Ltd.
Address: No. 24, Xingxing Road, Linping, Hang Zhou, China
Tel: +86 571 8811 5720
Fax: 0571-88110210
Postcode: 311100
E-mail:info@wrenchina.com
|
my account
