| Message: | KRD14 series pendulum shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of the test product in a shock environment. The shock response spectrum is the total result of a series of single-degree-of-freedom linear systems with different natural frequencies subjected to the same shock excitation response. When a product is subjected to an impact, the maximum value of its impact response means that the product has a maximum stress. Therefore, the shock response spectrum tester can better simulate the shock wave and shock energy suffered in the real environment.
1200mm table size withstand 1000kg load.
Windows-based stable control system, full-automatic remote-control interface.
The control & measurement system has built-in SRS specifications and tolerances, which is convenient for users to adjust and apply. It automatically completes the test and generates reports.
Adjust the driving shock energy by adjusting the air pressure, which is convenient to operate and high in efficiency.
The equipment takes up a small area and is easy to install.
Technical Specifications
Model
Parameters KRD14－50 KRD14－100 KRD14－200 KRD14－500 KRD14－1000
Load (kg) 50 100 200 500 1000
Table size(mm) 500×500 600×600 800×800 1000×1000 1200×1200
Response Frequency
Range (Hz) 10～10000
Max. Response
Acceleration (g) 6000 5000 3000 2000 1000
Gradient of Rising Stage (dB/Otc) 6～9
Tolerance Range
(dB) ±6～9
Overall Dimension
(mm) 1500×1200×1500 1800×1300×1600 2000×1500×1700 2200×1600×1800 2500×1800×2000
Power for Table AC220V ± 10%，50Hz, 3kVA
Power for Air
Compressor AC220V±10%, 50Hz, 3kVA / AC380V±10%, 50Hz, 5kVA; output pressure≤1MPa
Weight (kg) 2500 3000 3600 4000 5000
Working Environment Temperature range 0 ~ 40℃; Humidity ≤ 80% (25℃), non-condense
|
my account
