| Message: | For Hydraulic Direct-Acting Relief Valve equivalent to SUN RDBA, AAK received the re-peat order from Spanish client after 1 year
Last May, we launched a hydraulic direct-acting relief valve equivalent to SUN standard part RDBA.
Direct-acting relief cartridges are normally closed, pressure-limiting valves used to protect hydraulic components from pressure transients. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to limit the pressure rise. These valves are smooth and quiet, essentially zero leak, dirt tolerant, immune to silting and are very fast.
2 months after it was posted, we received the trial order from a new client in Spain. Per client, they will test the samples first. After it passed the testing, they will place the re-peat order for 500 pcs.
Last week, it was 13 months after the trial order was delivered, we received the re-peat order for 650 pcs from this Spanish client.
AAK hydraulic Direct-Acting Relief Valve 2 advantages:
1. The quality of this valve is benchmarking SUN, but price is much cheaper.
2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China
Technical parameters of AAK E-RDBA Hydraulic Direct-Acting Relief Valve:
Max. Operating Pressure: 350 bar (5000 psi)
Flow: 45 lpm (12 gpm)
Max. Valve Leakage at Reseat: 10 drops/min. (0.7 cc/min.)
Response Time – Typical: 2 ms
Reseat: >85% of crack setting
Adjustment - No. of CW Turns from Min. to Max. setting: 6
Operating Fluid Temperature: - 40°C ~ + 100°C (with Standard Buna N seals)
Cavity: T-162A
AAK E-RDBA Hydraulic Direct-Acting Relief Valve, benchmarking SUN RDBA, its service life is 2 times that of its domestic peers. You are welcome to give it a try.
AAK HYDRAULIC VALVES (811) 2024-08-26 |
my account
