| Message: | Detail Information for the mould:Product MaterialABS, POM, PP, PC, PC+ABS, PET, PA, PMMA, UPVC. PE, EtcMould Core SteelP20, H13, 718H, 738, 2738, NAK80, S136, SKD61Mould base:Standard mould base, Non-standard mould base.RunnerCold runner or Hot runnerCavitiesAccording to design and customer's request.Gate typeSide gate, Sub gate, Pin point gate, Edge gate, etcSteel TreatmentHeat treatment, Nitriding, etcHardness45-52 HRC (Various from the different kinds of steel material)Mould Life300,000 Shots (Various from the different kinds of steel material)Now our customer fromUnited State, Uzbekistan, Indonesia, Kazakhstan, Cyprus, Australia, etcPayment50% T/T deposit, and 50% T/T after checking the mould-made samples is qualified.Color for referenceRAL, PANTONEOEM DetailProvide us your samples or drawing(2D or 3D are all acceptable).Sample Feature:1.High Wear-resistance2.Good Anti-corrosion-resistance3.Good self-lubrication4.Very high-impact resistance5. Very good electrical insulation6.High inadhesion resistance7.Non-toxic and clean property Nylon Introduction:MC Nylon,means Monomer Casting Nylon, is a kind of engineering plastics used in comprehensive industries, has been applied almost every industrial field.The caprolactam monomer is first melted, and added catalyst, then poured it inside moulds at atmosphere pressure so as to shape in different castings, such as: rod, plate, tube. The molecule weight of MC Nylon can reach 70,000100,000/mol, three times than PA6/PA66. Its mechanical properties are much higher than other nylon materials, such as: PA6/PA66. url:http://www.aymold.com |
my account
Is this a real buying request?