| Message: | 4.4AH CC150 smart mower 1.Rear wheel Use solid core wheel for CC150, heavier rear wheel than it used for S510, it can keep from slippery when running on slopes and hills.2.6pcs of Small blades Please check the picture attached, increased the cutting width,also each blade with four sharp edges, every edge can used if one damaged by hard stone or other objects. 3.without ultrasonic sensors The bumper function is good enough. 4.Improve the front wheel. Use PPR material for the front wheel, it is softer than the original one, and against the vibration when working on the lawn.Also the front wheel with stainless steel holder, against rusting after long time using. 5.add range function: There are four options for the ranges, user can choose the distance when the robot hit the virtual wire according the condition of different lawns. 6.Different charging connection, CC150 has a better connection with the charging station, two charging heads connect the copper sheets perfectly. 7.Improve the line function: Change the running pattern for the line mode(Line function on):before:user has to put the robot on the back of the charging station to start, the robot will follow the wire cutting first.it is not user-friendly.Model NameSPM14-320Product Size600x524x269mmPacking Size720x570x320mmCutting Power68WGross Weight17.2KGWorking Voltage24VBattery Avaliable7AH Lithium BatteryWorking Time3-3.5H(Average)Charge Time4HMax Cutting Scope3000sqmMax Cutting Width340mmMax Cutting Height140mmBlade Type2.5-5.5cm(6 options of blades)Working Speed18-20m/minClimbing Capability45 degreeNoise |
my account
Is this a real buying request?