| Message: | 1.Product name: Bale Arm Crate Mould2.Part material: PP3.Mould cavity: single cavity ~ 4cavity4.Mould base: S50C, P205.Core & cavity: P20, 718, H13, S1366.Runner: hot runner from DME, YUDO or as per client’s request7.Mould finish: polish and logo engraved8.Mould life: 500K ~ 800K shots9.Optimal design with max. cooling water up to the product surface10.Wear plates applied for longer mould life11.Parting line is well protected, and with high speed CNC machining to achieve precision 0.02mm12.Samples and videos for mould trials available for clients to check13.T1 time: 45- 50 workings after confirmation on the mould drawings 14.Mould part 2D drawings to be sent with mould shipment, 3D drawings to be sent via mail to clientsWhy Choose US? Not all mold manufacturers are alike Euro Mould who takes priority in mold quality. A comparison below is made between our well-designed, solidly built moulds for reliably good quality products at lowest cost and a low cost mould for the same products after operating for relatively a short time. The difference is obvious.Subject Mold (A)- Euro Mould Mold (B) 1.Concept & Design Conceived from start with high productivity and lowest cost product in mind. Much time is spent on the mold concept before starting the actual design, or beginning to cut steel.Little if any thought has been given to the mold, except getting the shape of the product right, at the lowest possible mold cost.2.Runner Systems Much thought is given to decide on the most suitable runner system, the gating, cooling, and ejection of the products.As long as the mold can produce the desired product, even only for a short time, it is considered acceptable.3.Mold steel selection Mold steel selection is appropriate for the expected life and performance of the mold and often, the best quality steels and other materials are selected, without too much concern about the added cost. We keep to our promise to our customers for the materials specified and agreed upon, for which we can s......url:http://www.europlasmould.com |
my account
Is this a real buying request?