| Message: | FAG 7026-MP-UA Brass Cage Angular Contact Ball BearingFAG 7026-MP-UA bearing is contact angle 30o ,brass cage angular contact ball bearing.Inner diameter is 130mm,outer diameter is 200mm,thickness is 33mm.● Item: 7026-MP-UA FAG Ball Bearing● Type: FAG Angular Ball Bearing● Radial Clearance: C0,C3,C4● Cage: Brass Cage● Dimensions: 130mm x 200mm x33mm/Metric● ID (inner diameter)/Bore: 130mm● OD (outer diameter): 200mm● Width/Height/thickness: 33mm● Size: 130 x200 x 33 mm● Quantity: One Bearing● Dynamic load rating Cr: 131000 N● Static load rating Cor:142000 N● Limiting Speed: 5000N RPM● Made in GermanyThe raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, FAG provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads. url:http://www.droke-bearing.com |
my account
Is this a real buying request?