| Message: | 1. Horizontal sand mill instruction:The horizontal sand mill integrates the essence of current domestic and foreign models, and has the advantages of high efficiency, strong work continuity, less pollution, reliable self-control, low cost, compact structure, generous shape, convenient use and maintenance, etc. Very practical.1. Horizontal sand mill is divided into SW-15, SW-30, SW-50, SW-100, SW-200 according to the effective volume of the working cylinder2. The material in contact with the material is divided into stainless steel and carbon steel.3. According to the specific conditions and requirements, divided into explosion-proof and ordinary motor.There are more than 20 models in total.2. Features and principlesA multi-layer grinding disc is mounted on the rotating main shaft of the horizontal sander cylinder. When the main shaft rotates, the grinding medium grinds the slurry pressed into the cylinder under the driving of the rotating disc, so that the fine slurry in which the solid material is refined passes through the filtering gap or the mesh hole which is smaller than the particle size of the grinding medium. The barrel part is provided with a cooling or heating device to prevent a large amount of heat generated by the friction between the material, the grinding medium and the disc in the tube, and the quality of the product is affected, or the flow of the slurry is condensed to affect the grinding efficiency. . Grinding media can be made of suitable natural sand, or artificial glass beads with a particle size of 0.1 to 2 mm. Currently, zirconia beads have been used as grinding media in sand mills at home and abroad. Zirconia beads are easy to clean and have high hardness and glass beads. And natural sand is more wear-resistant, so at present domestic high and low grade sand mills use zirconia beads as grinding media. When the feed size is less than 450 microns, the discharge size can be less than 1 micron. The mill refines the material while also dispersing and ......url:http://www.sfjxsandmill.com |
my account
Is this a real buying request?