| Message: | To adapt to the working condition of
1. Multi-station welding station;
2. Single-station or double-station big suction cover welding station;
3. Multi-station grinding;
4. Flame cutting, laser cutting and plasma cutting.
Principle
1. Dust generated in the process of welding, cutting and polishing enters into the purifier through the suction pipe under the action of negative pressure.
The Martian dust is separated by a fire screen before entering the chamber, while the residual heat is blocked
2. The flow plate is evenly distributed in the purification chamber, so as to be better purified by the filter cylinder.Larger particles of soot are produced by gravity
3. Use the bottom to sink into the dust bucket, and the fine particles of floating dust under the action of suction by the filter cartridge filtration.When the inner and outer pressure of the filter cylinder is different
4. When the set value is reached, the electromagnetic pulse valve opens, and the filter barrel is sprayed to clear the ash instantaneously without stopping the machine, and the pressure difference changes after the cleaning
Small, dust remover continues to maintain the status of dust collection.
Parameters:
Model:LB-XCY-15S
Air volume（m3/h）:16000
Power:18.5kw
Size:2930*1400*2540(L*W*H)
Voltage:3 phase 440V/50HZ
Variable frequency control
Filter material:ePTFE-membrane
Cleaning method: Pulsejet cleaning
Filtration efficiency:＞99.9%`
Noise level:75dBA
Air intake:φ500mm url:http://www.loobofumeextraction.com |
my account
Is this a real buying request?