| Message: | Rosemount 8705-M Flanged flowmeterFeature : All flanged sensors are fabricated from stainless and carbon steel and welded to provide a hermetic seal that protects against moisture and other contaminants. Sizes range from 1/2-in. (15 mm) to 36-in. (900 mm). The sealed housing ensures maximum sensor reliability by protecting all internal components and wiring from the most hostile environments Specifications :1. PTFE available in line sizes: 1/2-in. to 24-in. (15 mm to 600 mm) ASME Class 150, Class 300, Class 600 (derated), and EN 1092-130-in. and 36-in. (750 mm and 900 mm) AWWA Class D, ASME Class 150, and MSS SP44 Class 150.2. Polyurethane available in line sizes:1-in. to 24-in. (25 mm to 600 mm) ASME Class 150, Class 300, Class 600 (fully rated) and EN 1092-130-in. and 36-in. (750 mm and 900 mm) AWWA Class D and MSS SP44 Class 1501-in. to 16-in. (25 mm to 400 mm) ASME Class 90011/2-in. to 12-in. (25 mm to 300 mm) ASME Class 1500Consult Technical Support for ASME Class 2500.3. Neoprene and Linatex available in line sizes:1-in. to 24-in. (25 mm to 600 mm) ASME Class 150, Class 300, Class 600 (fully rated) and EN 1092-130-in. and 36-in. (750 mm and 900 mm) AWWA Class D, ASME Class 150, and MSS SP44 Class 1501-in. to 12-in. (25 mm to 300 mm) ASME Class 90011/2-in. to 12-in. (25 mm to 300 mm) ASME Class 150011/2-in. to 8-in. (25 mm to 200 mm) ASME Class 2500.4. PFA available in line sizes: 1/2-in. to 12-in. (15 mm to 300 mm) ASME Class 150, Class 300, and EN 1092-1 Flanges Technical parameters : 14-in. (350 mm) ASME Class 150; not available with coil housing codes M2, M3, or M4.Products show : Why chose us : url:http://www.xyindustrial-instruments.com |
my account
Is this a real buying request?