| Message: | Tensioning the safety of the pump/prestressed electric oil pump
(A) power wiring to be connected to the zero line, and at any time to check the insulation at all times, so as to avoid electric shock; use should always check the power cord connection or the beginning of contact is reliable, to prevent the motor due to lack of operation and burned.
(B) tubing and joints to be manufactured according to specifications, and at any time to check, so as to avoid a burst accident, oil pump pressure can not be disassembled joints, piping and oil table.
(C) the pressure gauge to be checked at any time to prevent failure caused by the accident.
(D) should be opened before driving the control valve (no load start). Use should check the safety valve to adjust the pressure is appropriate, and often ensure sensitive and reliable.
(5) installed in the upper body of the bearings should be timely replacement of lubricants according to the situation.
(6) When the oil level is too low, the flat surface bearing of the pump body shall not work for a long time when the oil surface is exposed. url:http://www.ztmineequipment.com |
my account
Is this a real buying request?