| Message: | Yokogawa EJX110A Differential Pressure TransmitterFeature ：The high performance differential pressure transmitter EJX110A features single crystal silicon resonantsensor and is suitable to measure liquid, gas, orsteam flow as well as liquid level, density and pressure. EJX110A outputs a 4 to 20 mA DC signalcorresponding to the measured differential pressure.Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications. Other key features includequick response, remote set-up using communications,diagnostics and optional status output for pressurehigh/low alarm. The multi-sensing technology provides the advanced diagnostic function to detect suchabnormalities as an impulse line blockage or heat trace breakage. FOUNDATION Fieldbus protocol type isalso available. All EJX series models in their standard configuration, with the exception of the Fieldbus type,are certified by TÜV as complying with SIL 2 for safety requirement. Specifications : AccuracyAbsolute Pressure1MPa or higher : 0.2% of spanLess than 1 MPa: 0.2%(1 MPa/span) of spanGauge Pressure ReferenceGauge pressure reference is 1013 hPa (1 atm)Output “”Two wire 4 to 20 mA DC output with digital communications, linear or square root programmable. BRAINor HART FSK protocol are superimposed on the 4 to20 mA signal.Output range: 3.6 mA to 21.6 mAOutput limits conforming to NAMUR NE43 can bepre-set by option code C2 or C3.Failure Alarm (Output signal code D and E)Analog output status at CPU failure and hardwareerror;Up-scale: 110%, 21.6 mA DC or more (standard)Down-scale: 5%, 3.2 mA DC or lessAnalog output status at process abnormality (Optioncode /DG6); Teachnical parameters : Products show : Why chose us : url:http://www.xyindustrial-instruments.com |
my account
Is this a real buying request?