| Message: | Andrea is from a British hydraulic equipment company. At the beginning of last year, they received an inquiry for hydraulic cylinders used in national defense military equipment, which needed to use hydraulic check valves. The specific requirements for the hydraulic check valve are: internal leakage 2drop/min, surface roughness Ra 0.1-0.2μm, concentricity tolerance of valve spool and valve hole is 0.005-0.01mm. These 3 requirements are more than twice as high as the standard parts of hydraulic check valves. Andrea realized the difficulty of purchasing, and contacted more than 10 hydraulic check valve manufacturers online and offline. Except for an old supplier who had cooperated for several years told her that he was 90% confident to meet the requirements, all other manufacturers could not achieve these 3 requirements.
After 45 days, the hydraulic check valve sample was installed on the oil cylinder, and less than 12 hours after commissioning, the hydraulic cylinder was running unstably during reciprocating motion. During disassembly, the engineer found that the hydraulic check valve had internal leakage, which exceeded 2 drops/min, and the concentricity tolerance also exceeded 0.01mm during testing. Andrea was helpless and had to continue to look for new hydraulic check valve manufacturers. More than 1 week had passed, the manufacturer had still not been confirmed yet. Andrea was urged by her boss and got anxious.
|
my account
Is this a real buying request?