| Message: | Polyolefin Heat Shrink End CapsHeat shrink end caps are a simple yet effective method for sealing cable ends, pipe, conduit or other similar objects.● 2:1 shrink ratio ● Superior resistance to weathering● Resistant to common fluids● Standard adhesive liner provides coated hot melt adhesive resists continuous operating temperature● Shrink temperature: start at 110ºC, and fully recovered at 130ºC SizeSize After Recovery(mm)Size As Supplied (mm)Cable Sizes(mm)Inner DiameterWall ThicknessInner DiameterWall ThicknessLength Outer DiameterΦ 11 ≤6.51.1±0.1 ≥110.7±0.2 ≥22Φ6-9Φ 16 ≤8.02.5±0.1 ≥161.2±0.2 ≥70Φ9-14Φ 20 ≤8.02.5±0.1 ≥201.2±0.2 ≥70Φ9-17Φ 25 ≤112.5±0.1 ≥251.2±0.2 ≥80Φ12-22Φ 32 ≤172.6±0.1 ≥321.5±0.2 ≥90Φ17-27Φ 40 ≤152.8±0.1 ≥401.5±0.2 ≥90Φ20-35Φ 55 ≤252.8±0.1 ≥551.5±0.2≥125Φ28-45Φ 75 ≤303.2±0.1 ≥751.8±0.2≥145Φ40-65 Φ 100 ≤423.5±0.1 ≥1001.8±0.2≥140Φ50-90 Φ 120 ≤593.5±0.1 ≥1201.8±0.2≥155Φ70-110 Φ 140 ≤634.0±0.1 ≥1402.0±0.2≥180Φ90-130 Φ 250 ≤944.0±0.1 ≥2502.0±0.2≥270Φ120-240Property Test Method Standard Value Operating TemperatureIEC 216-45ºC to+105ºCTensile StrengthASTM-D 2671≥13MPaElongation At BreakASTM-D 2671≥300%Tensile Strength After AgingASTM-D-2671/120ºC,168hrs≥10MPaElongation At Break After AgingASTM-D-2671/120ºC,168hrs≥240%Dielectric StrengthIEC 243≥15kV/mmVolume ResistanceASTM-D-2303≥1×1013Ω.cmDielectric ConstantIEC 2503.0Radial Shrinkage-≥50%EccentricityASTM-D-2671≤35%Low Temperature FlexibilityASTM-D-2671-40ºC, 4hrs, No CrackingMinimum Shrink Temperature-90ºCMinimum Fully Recovered
Temperature-130ºC url:http://www.fiberglasssleeving.net |
my account
Is this a real buying request?