| Message: | Features and applications of Anti-yellow Electronic potting compound addition silicon for solar(PV) panels
It is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature.
It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
TECHNICAL GUIDELINES of Anti-yellow Electronic potting compound addition silicon for solar(PV) panels
1, Typical Application
It could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc. Please put part A and part B in separate container and stir evenly before mixing the two part together.
2, Mixing Ratio: part A: part B = 1:1
3, Dearation the mixture in vacuum pump for 3-5 minutes.Then the mixture could be used for pouring.
PACKAGE of Anti-yellow Electronic potting compound 20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
SHELF LIFE AND TRANSPORTATION of Anti-yellow Electronic potting compound addition silicon for solar(PV) panels
1. Twelve(12) months when stored at 25C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
More detail information, pls feel free to contact with OTT&Ada:
Email: ottsilicone_ada(at)163(dot)com
mobile telephone : 86-18672453027
Tel: 86-020-86819712
Fax: 86-020-86812232
Web: www(dot)ottsilicone(dot)com |
my account
