| Message: | ⌈ MAIN CHARACTERISTICS ⌋
Cast Steel Gate valves Glofa Supplied can be fully opened and fully closed to be used for cutting in the pipeline.The entire flow channel is a straight-through passage when the valve is fully-open, and the pressure loss is minimum.
Gate valve is usually for working condition in which the valve is not opened or closed frequently, It’s not suitable for adjustment or throttling.
⌈ DESIGN ADVANTAGES ⌋
The most important feature of the cast steel gate valve of Glofa produced is that they can be ensured that the permissible leakage rate can be lower than that specified in API 6D and API 600, and the middle shaft sealing can pass the USA VOC leakage test.
The wedged gate of the Glofa’s gate valve provides tight sealing even at low differential pressure. Grooved wedge guided and fitted by body, assures proper and consistent seal regardless of valve position, and also minimizes seat wear and damage, since seating surfaces of the wedge and seat are in contact during less than 5% of the total wedge travel.
Please visit us at our site www.glofavalve.com for more information about us.
⌈ TECHNICALS & CAPABILITIES ⌋
• Sizes Ranges from 1 1/2” thru 60”, DN40 to DN1500
• Pressure Ratings from Class 150 to Class 1500, PN16 to PN260
• Structured in Bolted Cover, Outside Screw and York, Flexible wedge
• Ends Connections in Flanged F.F R.F or RTJ, Butt-welded and Grooved
• Body Materials available in Carbon Steel A216 WCB, WCC, Low Carbon Steel LCB, LCC, Alloy Steel A217 WC6, WC9, Stainless Steel A351 CF3, CF8, CF3M, CF8M, Duplex & Super Duplex Steel A890 GR. 4A, GR. 5A, Special Materials in Monel, Alu. Bronze C95800, 95600 etc.
• Actuations can be equipped with Handwheel, Gear Devices, Electric / Pneumatic or Hydraulic Actuators
• Optional Bypass system, Live Loaded Packing available upon request.
Please visit us at our site www.glofavalve.com for more information about us. |
my account
