| Message: | ⌈ MAIN CHARACTERISTICS ⌋
•Cast Steel Gate valves Glofa Supplied can be fully opened and fully closed to be used for cutting in the pipeline.The entire flow channel is a straight-through passage when the valve is fully-open, and the pressure loss is minimum.
•Gate valve is usually for working condition in which the valve is not opened or closed frequently, It’s not suitable for adjustment or throttling.
⌈ DESIGN ADVANTAGES ⌋
•The globe valve series also get short stroke , the openning height of the disc is just one quarter comparing to the gate valve which minimize the friction between the valve disc and seat, increase its ability for resisting the erosion. Besides, there is only one sealing face between the valve body and disc, make the manufacture process with better performance and easier for maintenance.
Please visit us at our site www.glofavalve.com for more information about us.
⌈ TECHNICALS & CAPABILITIES ⌋
• Sizes Range from 1 1/2” to 24'', DN40 to DN600
• Pressure Ratings from CL 150 to CL 2500, PN16 to PN260
• Structured in Swivel & Plug Disc, Bolted Bonnet, OS&Y Rising Stem, Welded Seat Ring, Screwed-in Back Seat
• Ends Connections in Flanged F.F R.F or RTJ, Butt-welded
• Body Materials available in Carbon Steel A216 WCB, WCC, Low Carbon Steel LCB, LCC, Alloy Steel A217 WC6, WC9, Stainless Steel A351 CF3, CF8, CF3M, CF8M, Duplex & Super Duplex Steel A890 GR. 4A, GR. 5A, Special Materials in Monel, Alu. Bronze C95800, 95600 etc.
• Actuations can be equipped with Handwheel, Gear Devices, Electric and Pneumatic or Hydraulic Actuators
• Optional SNDR Globe Check Valve, Angle type, Y pattern, bypass system on request.
Please visit us at our site www.glofavalve.com for more information about us. |
my account
